25 Degree Frame (1937 - 1940) 28 Degree Frame (1941 - mid 1946) 30 Degree Bullneck (mid 1946 - mid 1947) Wishbone Frames (1948 - late 1954) Straight Leg Frame (late 1954 - 1957) Drop Saddle (1958 - 1964) Electric Start (1965)



Straight Leg Frames

Straight frame mid 1955 - 1957


To purchase any of these items or to enquire about availability please send an email to raceframe@gmail.com .


Straight Leg Frame Casting   Straight Leg Frame

(VC1) Price of head casting is $581.02 USD plus tax if applicable

 

Price of complete frame is 4800.00USD plus tax if applicable
Please note: This frame is welded together as per original manufacturing specifications.
It is not TIG or Heliarc welded.



Click on the images below for a larger picture.

TRANS BRACE STIFFENER (RFE Part Number VC36B)

Trans Brace Stiffener

These are sold in pressed sets and come loose for ease of fitment.
Depending on the year of your frame they will need either - " tacking and brazing" , or "electric welding" in place.
They have the stiffening indent pressed into them as per original and come fully pressed for seat post and rear trans lug.

Price per set is $60.68 per set + tax if applicable. Overseas orders are exempt from Tax

Trans Brace Stiffner Trans Brace Stiffner

REAR ENGINE MOUNT (RFE Part Number VC6)

Rear Engine Mount

Rear Engine mount is fully machined and ready to install.

Price is $342.60 each + tax if applicable. Overseas orders are exempt from Tax

OIL TANK MOUNT (RFE Part Number VC10)

Oil Tank Mount

Oil Tank Mount is fully machined and ready to fit.

Price is $49.95 each + tax if applicable. Overseas orders are exempt from Tax

RIGID RUNNING BOARD LUGS (RFE Part Number VC11)

Running Board Lugs

Rigid Running Board Lugs are sold each and are fully machined and ready to fit.

Price is $36.51 each + tax if applicable. Overseas orders are exempt from Tax

REAR INNER PRIMARY MOUNT (RFE Part Number VC14)

Rear Inner Primary Mount

Fits 1936 through 1957 bikes.

Price is $7.60 each + tax if applicable. Overseas orders are exempt from Tax

BRAKE CROSS OVER STIFFNER (RFE Part Number VC65)

Brake Cross Over Stiffner

Brake Cross Over Stiffner is fully machined and ready to fit.

Price is $14.36 per set + tax if applicable. Overseas orders are exempt from Tax

Brake Cross Over Stiffner

KNUCKLEHEAD/FLATHEAD/PANHEAD REAR TRANS POST (RFE Part Number VC28)

Rear Trans Post

Rear Trans Post is straight knurled and ready to fit. It is knurled like OEM and comes with matching spacer. The spacer is placed between the trans cross brace plates
These are sold as a unit.

Price is $37.55 each + tax if applicable. Overseas orders are exempt from Tax

RIGID BRAKE CROSSOVER TUBE (RFE Part Number VC33)

 

Brake Crossover Tube is knurled and machined ready to accept bush.

Price is $27.17 each + tax if applicable. Overseas orders are exempt from Tax

INTERMEDIATE BACKBONE (RFE Part Number VC35)

Intermediate Backbone Full picture

This part is straight knurled one end to allow the Braze to flow. The other end is contour pressed to mate to the 1 1/2" Backbone.
A 3/32" hole is drilled into this part to allow the gas and hot air to escape while brazing is taking place.
An exact reproduction of the intermediate backbone used from 1938 through to the end of the run of rigid frames in 1957.

Price is USD $35.64 each + tax if applicable. Overseas orders are exempt from Tax

Intermediate Backbone Contour Pressed End Intermediate Backbone Knurled End

STRAIGHT LEG DOWN TUBE (RFE Part Number VC37)

 

Straight Leg Down Tube is knurled both ends and ready to fit.

Price is $31.15 each + tax if applicable. Overseas orders are exempt from Tax

RIGID FENDER RAILS (RFE Part Number VC39R)

 

Fender Rails are knurled and pressed as per original. This part is for the right hand side.

Price is $57.10 each + tax if applicable. Overseas orders are exempt from Tax

RIGID FENDER RAILS (RFE Part Number VC39L)

 

Fender Rails are knurled and pressed as per original. This part is for the left hand side.

Price is $57.10 each + tax if applicable. Overseas orders are exempt from Tax

RIGID FENDER RAIL BRACE (RFE Part Number VC41)

 

 

Price is $30.69 each + tax if applicable. Overseas orders are exempt from Tax

RIGID BOTTOM RAIL LEFT SIDE (RFE Part Number VC44)

 

Left Bottom Rail is knurled both ends and has chain relief as per original.

Price is $95.04 each + tax if applicable. Overseas orders are exempt from Tax

RIGID BOTTOM RAIL RIGHT SIDE (RFE Part Number VC45)

 

Right Bottom Rail is knurled both ends and is formed as per original.

Price is $75.24 each + tax if applicable. Overseas orders are exempt from Tax

LOWER SEAT POST BRACE (RFE Part Number VC47)

 

Lower Seat Post Brace is pressed to original shape and drilled to accept bash plate and seat post base.

Price is $39.60 each + tax if applicable. Overseas orders are exempt from Tax

SEATPOST CROSS BRACE (RFE Part Number VC48-B)

Seatpost Cross Brace

This part is used on all frames from 1948 to 1957 only.
Note. It is not suitable for any Knuckle frame.

Price is $34.61 each + tax if applicable. Overseas orders are exempt from Tax

RIGID REAR TRANS CROSS BRACE (RFE Part Number VC52)

Rigid Rear Trans Cross Brace Down

Rear Trans Cross Brace is pressed to original shape and drilled to accept rear trans posts.

Price is $33.74 each + tax if applicable. Overseas orders are exempt from Tax

Rigid Rear Trans Cross Brace Up

LOWER TANK MOUNT (RFE Part Number VC54)

Lower Tank Mount

Late 1954 through 1957 low tank mount.
These low tank mounts have been pressed with a taper to fit snugly to the down tubes on original frames.
The bracket has the advance lug off the left side and is drilled and tapped to OEM specs.

Price is $19.04 each + tax if applicable. Overseas orders are exempt from Tax

Lower Tank Mount 3 Lower Tank Mount 5

TRANSMISSION OUTRIGGER SUPPORT (RFE Part Number VC60)

Transmission Outrigger Support 1

Pressed to original shape. This bracket will fit snuggly around tube to give a nice tight fit for brazing or electric welding, depending on the correct welding procedure for the year of your frame. Shim plate is spot welded to bracket as was OEM.

Price is $21.78 each + tax if applicable. Overseas orders are exempt from Tax

Transmission Outrigger Support 2

REAR LOWER FENDER SUPPORT (RFE Part Number VC62)

Lower Fender Support Below

Rear Lower Fender Support is pressed to original shape and ready to fit.

Price is $31.88 each + tax if applicable. Overseas orders are exempt from Tax

Lower Fender Support Top Lower Fender Support Side

THROTTLE CABLE BRACKET (RFE Part Number VC59)

Throttle Cable Bracket

Throttle Cable Bracket is fully machined and ready to fit.

Price is $6.93 each + tax if applicable. Overseas orders are exempt from Tax

RIGID SEAT POST (RFE Part Number VC50)

Rigid Seat Post

The Rigid Seat Post is machined to accept seat post bush and has sweat brazed stiffener already fitted in the bottom half.

Price is $69.69 each + tax if applicable. Overseas orders are exempt from Tax

PANHEAD BACKBONE (RFE Part Number VC19 1952 and up)

Panhead Backbone

Panhead Backbone with all correct relief pressings.

Price is $55.44 each + tax if applicable. Overseas orders are exempt from Tax

REPLACEMENT SPEEDO PLATE CASTING (RFE Part Number VC16)

Replacement Speedo Plate Casting attached

Replacement speedo plate casting. Correct for 1948 and up. Has steering dampner dowl hole, speedo hole and speedo base plate holes machined and tapped and pads faced. This is made of Steel not cast iron and can be welded on with Tig, Heliarc Mig or oxy. You will note the picture with the item located with a 7/8" drill to the steering head assembly. I have purposely made this part to have a gap underneath to ensure that the weld goes under the part "penetration". When you die grind the weld after fitment to blend it to the steering head assembly the penetration weld is there to hold the part.

Price is $95.04 each + tax if applicable. Overseas orders are exempt from Tax

Replacement Speedo Plate Casting side view Replacement Speedo Plate Casting view

STRAIGHTLEG SIDECAR LUGS (RFE Part Number VC105L (Left), VC105R (Right) )

Straightleg Sidecar Lugs 1

These are made of Steel and will suit 1937 through 1947 and late 1954 through 1957 frames. The part numbers and Hallmarks are clear and have a clear flash mark running down the front and rear of the part exactly as did Original parts.

Price is $256.08 per side + tax if applicable. Overseas orders are exempt from Tax

Straightleg Sidecar Lugs 2 Straightleg Sidecar Lugs 3 Straightleg Sidecar Lugs 4

LEFT AXLE CARRIER (RFE Part Number VC108L)

Left Axle Carrier

Exact reproduction of Left axle carrier from 1938 - 1957. Comes fully machined and ready to fit. Faithful reproduction of the part number and Hallmark.

Price is $317.79 each + tax if applicable. Overseas orders are exempt from Tax

RIGHT AXLE CARRIER (RFE Part Number VC108R)

Right Axle Carrier

Exact reproduction of 1938 - 1957 right axle carrier. Machined to exact OEM tolerances. Faithful reproduction of the part number and Hallmark. This part comes fully machined and ready to fit. Can be supplied with plug weld holes if desired.

Price is $317.79 each + tax if applicable. Overseas orders are exempt from Tax

Right Axle Carrier side view

SEAT POST CLUSTER (RFE Part Number XE-1b)

Seat Post Cluster 1

Seatpost cluster for 1952 to 1957 Panhead Wishbone frames. The spigot that slips into the end of the backbone is machined for 1/8" inch wall tube. 1952 through 1957 frames used 1/8" inch wall tube for the backbone. If you are unsure of the tube thickness, look down the hole for your speodo cable "in the steering neck" and you can clearly see the thickness of the tube. If you are still having problems working out the exact date of the frame contact me and I have other ways to work it out. The grease nipple hole can be drilled and tapped by request.

Price is $287.48 each + tax if applicable. Overseas orders are exempt from Tax

Seat Post Cluster 2 Seat Post Cluster 3



To purchase any of these items or to enquire about availability please send an email to raceframe@gmail.com .




OzForex Currency Converter